| |
Lightman
- Strobe Kits




ABOVE- Shown mounted on PocketPod®
Table Tripod (Not Included)


ABOVE- Shown- Lightman
Strobe- Basic Kit components
©
Lightman Strobes

ABOVE- Lightman LED Strobe -Shown
mounted on Cone Illuminator ®
Adapter plate

ABOVE(Left)
12" Orange Traffic Cone | ABOVE(Right)
Lightman
LED Strobe-Cone Illuminator in use
Description..
The Lightman strobe units are compact,
lightweight battery powered triangular illumination
flashers or beacons that are made of impact resistant
plastic. They are used to mark a vehicle, scene or
person in such a manner that signals to emergency
vehicles, oncoming traffic and persons that caution
must be exercised in approaching the scene. Due to
a thoughtfully designed range of mounting accessories,
the Lightman Strobes have personal, police, fire,
rescue, traffic emergency, industrial, hobbyist as
well as outdoor applications.They can be mounted to
vehicles, belts, sunvisors, traffic cones, reflective
triangles, guard rails, clothing, and backpacks. The
Basic Kit Includes: 1, Lightman Strobe, a belt clip,
a magnet, an all-purpose eyelet, a suction cup, and
a soft black vinyl pouch for containing the entire
kit. Optional kits include:
- Basic Strobe Kit
- Bike Kits
- Landing Zone/Scene Safety Kit 911
- Home Locator
- Highway Safety
Kit
Unlike products that depend on
potentially hazardous flammable chemicals to create
an attention getting flare, the Lightman strobes are
part of a growing family of emergency safety products
that use reliable solid state components for safe,
durable and long lasting illumination. By using two
common AA size batteries (rechargeable NIMH recommended)
, the Lightman Strobe is also an economical and environmentally
friendly alternative to disposable flares. We judged
the product to be durable and well made and the access
to the battery compartment secure, yet easy enough
to breech with a coin. The rubber sealed On/Off switch
is responsive and sure- instilling confidence that
the Lightman Strobe will not fail the user either
in daily use or in emergencies. We
performed our customary drop test from 6' onto concrete
and asphalt and the product remained intact and neither
split open nor broke after three tries on each surface.
No claim is made for resistance
to direct impact from a moving motor vehicle or for
crush resistance in the event a unit is run over.
------------------
Basic Kit msrp-$24.95 (batteries not included)
Cone Illuminator Kits $109 /set of six
LED Strobes, lenses & Discs (batteries not included)
------------------
Specifications..
- Colors:Strobe lenses are available
in clear, red, amber, blue and green
- Composition: Polycarbonate &
ABS
- Fabrication:Injection molded
- Power: 2 AA batteries/ hard-wired
3, 12 & 24 volt models (optional)
- Runtime: 3-5 hrs (Xenon model )
& 8-20 hrs (LED model)-manufacturer's ratings
- Dimensions:Max W=3.4", Max
D=1.5"
- Net weight:3.9oz(110gms) with batteries
installed
- Warranty: 2 year limited (defects
in materials/fabrication)
- Worthy of note:
- Unparalleled strobe Brightness - Visible over
2 miles (tested on a clear night)
- Extraordinary multidirectional visibility
- Waterproof switch & gasket seal
- 1 flash per/second rate (1flash per/1.25 second
rate or continuous for LED version)
- Remote accessory switch for wheelchair, police
bike patrol etc (optional)
- Numerous task/context focused mounting accessories
available
- Bundled kits available
------------------
Evaluation Results & Conclusions...
Read
This Real Life Testimonial...
Ease of Use
Excellent . Requires very little learning
for use and basic instruction (included) for battery
replacement. Intuitive functional model. No cognitive
overhead. Customers are instructed to use a coin,
screwdriver or other similar object to pry open and
separate the colored lens from the unit base. Two
AA size batteries are then inserted in correct orientation
into the two respective slots. The colored triangular
lens is then snapped on in no particular orientation
to ensure a tight seal has been made with the base.
In a similar manner to switching on battery powered
bicycle warning lights, the sky blue rubber switch
is depressed to turn the unit on. After a momentary
latency, it starts flashing and continues for hours
before loosing brightness and stopping. To turn the
unit off, the user re-presses the blue click switch.
5 points
------------------
Task performance optimization
Effectively accomplishes the task of clearly
signaling a warning to,or calling the attention of
oncoming vehicles or persons .Users must remember
to keep a set or two of the required batteries handy
- since the units will not work without power.There
is no low battery power indicator so either lithium
batteries should be used (for infrequent use) or units
containing batteries should be tested periodically.
To prevent battery leakage, it's recommeded that batteries
be removed for long term storage. The Lightman Cone
Illuminator kit is an excellent way to turn standard
traffic cones into flashing emergency flares. Either
pre-assembled or assembled on site - cones thus equipped
extend the usefullness of both trafic cones as well
as Lightman Strobes on hand for effective night time
traffic management.
4.5 points for Lightman Strobe Xenon
5.0 points for Lightman Strobe LED + Cone Illuminator
------------------
Durability
Long term tests have not been done. First
impression . Replacement frequency will depend on
variables such as frequency of dismantling / re-assembly,
roughness of use, exposure to UV and heat/cold as
well as other unpredictable factors. Based on continuous
everyday use for six weeks we have provisionally given
this product a durability rating of:
4 points for Lightman Strobe Xenon
4.5 points for Lightman Strobe LED
------------------
Adaptability
Within the constraints of it's design the
Lightman Strobe is a suitable problem solver in several
domains and may be compatible with
a variety of third party products- especially ones
that are designed to conform to Lightman accessory
specifications. As an example, the
thread size used for attachment at the back of the
unit is the universal standard for photographic equipment-
1/4" X20. As a result, any photographic accessory
that terminates in a 1/4"X20 male thread will
fit perfectly into the back of the Lightman Strobe.This
not only opens up a plethora of solutions using existing
hardware, but also makes designing context and task
specific solutions as easy as a visit to a neighborhood
hardware store.
As illustrated - the Lightman Strobe is available
in an LED version that uses a cluster of superbright
10mm LEDs instead of a xenon flash tube. The LED version
is recommended in situations where either a constant
or an intermittent light is desired. The same lenses
that fit the xenon version, fit the LED version as
well. The LED Lightman Strobe has the added advantage
of being more durable to shock and having the ability
to give continuous light in addition to one flash
per/second strobe. The Cone Illuminator kit is a durable
plastic plate designed to hold the Lightman Strobe
via its1/4"X20 thread and a bolt (provided).
A hole in the adapter plate allows for access to the
On/Off switch. Once mounted to the plate the Lightman
Strobe is then jammed into the bottom of a 12"
- 24" traffic cone and switched on.
5 points
------------------
Quality of match to host product
The Lightman
Strobe xenon is ideal for situations where maximum
visibility and attention getting factor are of greatest
importance.Used on a bicycle, building ,human or vehicle-
it has the maximum attention getting quotient against
size. The Lightman LED is preferred for situations
that call for extended runtime and durability/longevity
over brightness.
5 points for Lightman Strobe xenon and LED
+ Cone Illuminator
------------------
Pros > 1) Compact & Lightweight 2)
Context relevant kits 3) Versatile 4) High build quality
5) Rugged 6)Effective 7) Efficient 8)Easy to use 9)
Economical in the mid to long term 10) Environmentally
friendly 11)Safe to use with no training 12) Ergonomically
designed 13) Uses ubiquitous battery type/size 14)
Reasonable warranty
Cons > 1) No retail source 2)
Xenon tube is more fragile than LEDs 3) Pricier than
chemical flares 4) Only one flash mode available 5)
Requires batteries
Rating -4.75 Stars
= Highly Recommended
Supplier
: http://www.lightmanstrobes.com/xenon.htm
|